Articles in this category How the system works The LiftCam Pro is a wireless surveillance system specifically designed for forklift trucks. The camera transmits the image via the antenna to the monitor. The camera can be powered from the 12V Powe... What is included in your LiftCam Pro box Your liftCam Pro solution includes the following products: Spare parts and accessories for LiftCam Pro All parts included in the LiftCam Pro are available as spares, please see the “What is included” section. There are also a number of accessories to the LiftCam Pro system: How to start The LiftCam Pro system is very easy to handle. Make sure the camera and the monitor are safely fastened and connected to power sources. The monitor’s red LED will be lit when it is connected to power.... Adding a camera Up to four cameras can be connected to the LiftCam Pro monitor. The camera included in the LiftCam Pro system will be default paired to Channel 1. Do not power up the camera at this stage. On the mon... Navigating the channels By pressing any of the arrow buttons, the monitor will circle through all channels. After Channel 4 there is a Scan mode where the monitor loops through all channels selected for looping. Dual camera mode By pressing the square button, the monitor will enter the dual screen mode which shows two cameras simultaneously. When in dual screen mode, the left arrow will circle through the leftmost camera pict... Menu options The menu is accessed by pressing the circular button. NOTE: Do not press and hold – this will turn the monitor off. Technical specification Monitor LC
